Gedruckte Elektronik in der Diskussion

Die neuesten technischen Entwicklungen werden bei der Podiumsdiskussion der LOPEC von Experten aus allen Fachgebieten diskutiert und bewertet.

Während des Roundtable-Gespräches diskutieren Wissenschafts- und Wirtschaftsexperten über Möglichkeiten, Herausforderungen und Marktpotenziale. Welche Neuerungen haben Potential, welche Trends sind richtungsweisend? Dies wird in der Diskussionsrunde zu klären versucht.

Die Teilnehmer der Podiumsrunde kommen aus allen Bereichen der Branche und repräsentieren die gesamte Wertschöpfungskette: von der Materialforschung über Prozesse bis hin zu den Anwendungen in verschiedenen Industriezweigen.

Wir hätten Sie gerne zur diesjährigen Ausgabe der LOPEC begrüßt.

Eine Auswahl der geplanten Inhalte sowie Informationen zu den Top-Themen der LOPEC 2020 stellen wir Ihnen hier zur Verfügung Der genaue Termin der Podiumsdiskussion 2021 sowie Themen und Namen der Sprecher werden Ihnen hier im Januar 2021 zur Verfügung stehen.

Das Format Panel Discussion der LOPEC 2020 steht für zwei spannende Expertendiskussionen zu aktuellen Themen aus der Welt der gedruckten Elektronik.

Weaving Electronics in the Fabric of Everyday Life

25. März 2020 von 15:00 – 15:45 Uhr auf dem LOPEC Forum (Sprache: Englisch)

Im Mittelpunkt der ersten Diskussion stehen die Möglichkeiten, Herausforderungen und Marktpotenziale der gedruckten Elektronik im Segment Smart Living, einem der beiden Fokusthemen der diesjährigen LOPEC. Unter dem Titel „Weaving Electronics in the Fabric of Everyday Life“ diskutieren namhafte Experten aus Forschung, Wissenschaft und Wirtschaft darüber, welche Neuerungen Potential haben und welche Trends richtungsweisend sind. Die Teilnehmer der Podiumsrunde stammen aus unterschiedlichsten Bereichen der gedruckten Elektronik und repräsentieren die gesamte Wertschöpfungskette – von Materialforschung über Prozesse bis hin zu Anwendungen in diversen Industriezweigen.

Unter anderem werden folgende Themen diskutiert und beleuchtet:

  • What are challenges to integrate printed electronics with traditional (e. g. textile, wearable) manufacturing products?
  • Which innovation is a key element for success to make functional wearable products a reality?
  • What are the benefits for end users?
  • What products can consumers expect tomorrow?

Moderator:

Giovanni Nisato
Gründer von Innovation Horizons (CH)

Die Teilnehmer der Panel Discussion:

Marina Toeters
Marina Toeters
Designerin und Forscherin im Bereich Fashion-Technology
by-wire.net (NL)
Marina Toeters

Designerin und Forscherin im Bereich Fashion-Technology,
by-wire.net (NL)

Marina Toeters

Marina Toeters operates on the cutting edge of technology and fashion design. Through her business by-wire.net she stimulates collaboration between the fashion industry and technical innovators for a relevant fashion system and supportive garments for everyday use. She advises – via prototyping and a research through design approach – Philips Research, Holst Centre, fashion designers and others on product development. She designs and develops concepts to show the world how fashion could be. As a teacher, coach and researcher, she works for the fashion department in the University of the Arts Utrecht (HKU) and industrial design faculty in Eindhoven University of Technology. In 2019 Marina edited the book Unfolding Fashion Tech: Pioneers of Bright Futures and opened the Fashion Tech Farm, a studio, incubator and small-scale production facility for innovative fashion, based in Eindhoven, The Netherlands. More info: www.by-wire.net

John Rogers
John Rogers
Professor
Northwestern University, Departments of Materials Science and Engineering, Biomedical Engineering and Medicine (US)
John Rogers

Professor,
Northwestern University, Departments of Materials Science and Engineering, Biomedical Engineering and Medicine (US)

John Rogers

John A. Rogers is the Louis Simpson and Kimberly Querrey Professor of Materials Science and Engineering, Biomedical Engineering and Medicine at Northwestern University, with affiliate appointments in Mechanical Engineering, Electrical and Computer Engineering and Chemistry, where he is also Director of the recently endowed Center for Bio-Integrated Electronics. He has published more than 700 papers, is a co-inventor on more than 100 patents and he has co-founded several successful technology companies. His research has been recognized by many awards, including a MacArthur Fellowship (2009), the Lemelson-MIT Prize (2011), the Smithsonian Award for American Ingenuity in the Physical Sciences (2013), the MRS Medal (2018) and most recently the Benjamin Franklin Medal from the Franklin Institute (2019). He is a member of the National Academy of Engineering, the National Academy of Sciences, the National Academy of Medicine, the National Academy of Inventors and the American Academy of Arts and Sciences.

Stijn Gillisen
Dr. Stijn Gillisen
PD-Manager für Druckfarben und Beschichtungen
Henkel AG (DE)
Stijn Gillisen

PD-Manager für Druckfarben und Beschichtungen,
Henkel AG (DE)

Dr. Stijn Gillisen

Stijn Gillissen is the global head for printed electronics at Henkel. Henkel is a market leader for material solutions in printed electronics and aims to build partnership networks to make any application using printed electronics a success. After completing his PhD in polymer and organic chemistry Stijn started his professional career at Henkel 17 years ago as a chemist designing new material solutions (adhesives, coatings and inks) used in the assembly of electronic devices. Since than he held positions in global technology management, strategic marketing and business development in the electronic adhesive division of Henkel.

Joao Gomes
Dr. João Gomes
Chief Operations Officer
COO CeNTI – Centre of Nanotechnology and Smart Materials (PT)
Joao Gomes

Chief Operations Officer,
COO CeNTI – Centre of Nanotechnology and Smart Materials (PT)

Dr. João Gomes

João Gomes holds a Master’s degree in Materials Processing and Characterization from and a Degree in Physics from University of Minho. Previously worked as physical data and device analyst and as a junior meteorologist at the Portuguese National Meteorological Institute. From 2006 to 2007 worked as a researcher for the Electroactive Materials Group of the Department of Physics of the University of Minho. Since 2007 worked a researcher, and from 2013 to 2017 as R&D Manager of the Smart Materials & Embedded Systems Department at CeNTI, focusing on the areas of Printed and Integrated Electronics and Embedded Systems. Currently holds the position of Chief Operations Officer at CENTI with the responsibility of overseeing development of new technologies and products with printed and integrated electronics and smart functionalities for the automotive and aeronautic, home and wellness, and construction industrial sectors. He has many publications in this field in international journals including several patents.

Women in Printed Electronics

25. März 2020 von 16:00 – 17:00 Uhr auf dem LOPEC Forum (Sprache: Englisch)

Unter dem Titel „Women in Printed Electronics“ beleuchtet die zweite Podiumsdiskussion die gleichnamige neue Initiative der OE-A (Organic and Printed Electronic Association). In der Diskussion geht es vor allem darum, wie ein verstärktes Gewinnen von weiblichen Führungskräften und Mitarbeitern ein wertvoller Booster für die Innovationskraft der Branche der gedruckten Elektronik sein kann – gerade vor dem Hintergrund einer sich derzeit immer schneller verändernden Welt. Die Podiumsteilnehmerinnen verfügen über sehr unterschiedliche berufliche und kulturelle Hintergründe, sind international ausgerichtet und haben in ihren Bereichen beeindruckende Beiträge geleistet. Sie arbeiten in technischen Bereichen – einschließlich der gedruckten Elektronik – oder engagieren sich auf politischer Ebene für entsprechende Förderung und Initiativen.

Unter anderem werden folgende Themen diskutiert und beleuchtet:

  • What are the benefits of increasing gender diversity in the tech industry?
  • How would you encourage people that want to support women professionally developing in tech fields?
  • How do policies affect the support of women in tech innovation?
  • What kind of environment would help the current and next generation to seek a career in the tech industry?

Moderator:

Giovanni Nisato
Gründer von Innovation Horizons (CH)

Die Teilnehmer der Panel Discussion:

Helen Kardan
Helen Kardan
Senior Manager New Business Development
ASML (NL)
Helen Kardan

Senior Manager New Business Development,
ASML (NL)

Helen Kardan

Helen Kardan received a B.Sc. in Mechanical Engineering and M.Sc. in Computer Sciences from Tohoku University in Sendai, Japan. After working for several years in various positions in innovation management and business development in high-tech industries, including Semiconductor and Flexible Electronics, she has joined ASML as part of New Business Development team responsible for identifying new business domains for ASML’s future roadmaps as well as supporting high-tech eco-system in the Eindhoven region.

Phoebe Tan
Phoebe Tan
CEO
Raynergy Tec (TW)
Phoebe Tan

CEO,
Raynergy Tec (TW)

Phoebe Tan

Broad experience with start-ups, printed electronics technology development, starts-up corporation restructuring, joint venture technology with transfer managing technology and chemical product development; Creating and executing Technology and product roadmaps; Worked through complete R&D cycles from idea to product; intellectual property Portfolio management, establishing partnerships and contracting. Dr. Tan is currently the CEO of Raynergy Tek Incorporation, Taiwan, one of leading specialty chemical supplier in particular photoactive organic materials for emerging applications in renewable and sustainable energy, futuristic sensor and biomedical. Her role is primary focuses on oversees overall corporate operation, strategic planning, intellectual properties management and business development activities, led a team of 23 members. Prior to joining Raynergy Tek, Dr. Tan had extensive experiences in the field of Organic electronics focusing on Organic semiconductor for flexible display and sensors application. She was

previously employed at Polyera Corporation, where her responsibilities covered the product development focusing on solution processed organic TFT materials platform, key coordinator in bridging the gap from lab to fab, leading a team of 13scientists on formulation optimization and coordinating projects for OTFT materials validation in display fab of G2.5 facility as well printed organic sensor platform. Dr. Tan received her Ph.D. In Materials Science and Engineering from Nanyang Technological University in 2009, she has published more than 20 international journal Papers includes Nature Communication, Joule, Scientific Reports, Advanced Materials and owns 2 invention patents.

Nina Riegel
Nina Riegel
Head of Innovation Management R&D Excellence
OSRAM (DE)
Nina Riegel

Head of Innovation Management R&D Excellence,
OSRAM (DE)

Nina Riegel

Nina Riegel, phd, is with OSRAM Opto Semiconductors since 2018. Her current position is senior project manager for business processes; before she was leading global teams in multi-project management and for R&D excellence. From 2006 to 2018 she was in organic electronics: for OSRAM OLED GmbH she was responsible for Innovation management including IP management, funded projects and Lobbying: During this time, she was Board member of OE-A and Co-Founder of the OLED Licht Verein.

In all her functions she was actively driving diversity and innovation by offering spaces for collaboration, fostering trustful discourse and team work. She starts and supports initiatives for new ways of working and re-thinking leadership. She is actively mentoring women within and outside her Company and takes an active role in diversity networks.

As parents of 3 school children she and her husband together are enjoying the challenges of balancing family and career.

Luisa Prista
Luisa Prista
Head of Department A
Executive Agency for Small and Medium-sized Enterprises (EASME) & European Commission (BE)
Luisa Prista

Head of Department A,
Executive Agency for Small and Medium-sized Enterprises (EASME) & European Commission (BE)

Luisa Prista

Luisa Prista is Head of Department at European Executive Agency for SMEs in Brussels, responsible for the implementing European programmes in the fields of R&I for SMEs and Start-ups including COSME and Horizon 2020 EIC pilot.

She is a Mechanical engineer in Applied Thermodynamics. She started as a researcher and lecturer at university of Lisbon. She worked with Profabril on energy audits in different energy intensive industries. In Switzerland, she joined Lombardi engineering as a project engineer on tunnelling and computer modelling. In 1990 became head of the InfoEnergie office at the Cantonal and Swiss Federal Government, dealing with, environment, energy efficiency and renewables. In 1994 she joined in European Commission in Brussels for different management positions at DG Research and DG GROW related to research, innovation and legislation in a wide variety of industrial sectors (materials and nanotechnologies, transport, security and space, circular economy, eco innovation and chemicals). She was also Head of the Unit dealing with Women in Science and Innovation. Gender issues and women entrepreneurship have been mainstream topics across her life and career. She is a co-author of the report ‘Strengthening Canada’s Research capacity in the Gender Dimension’, while working in 2012 for the Council of Canadian Academies.

Tickets
Seien Sie dabei

Mit nur wenigen Klicks können Sie Tickets für die Fachmesse und den Kongress kaufen oder Ihren Gutschein einlösen.

Tickets & Preise
Programm
Die LOPEC Highlights

Das Programm der LOPEC ergänzt den Mix aus Messe und Kongress und schafft viele Gelegenheiten zum Networking.

Programm
Messe
Im Fokus

Einblicke in jene Branchen, die in der gedruckten Elektronik aktuell eine besonders wichtige Rolle spielen.

Fokusthemen